Experimental Investigation of the Effect of Purge Flow and Main Flow Interaction in a Low-Speed Turbine Cascade Passage

In order to protect the vulnerable turbine components from extreme high temperature, coolant flow is introduced from the compressor to the disk cavity, inevitably interacting with the main flow. This paper describes an experimental investigation of the interaction between the main flow and the purge flow in a low-speed turbine cascade with three purge flow rates, Cm = 0, Cm = 1%, and Cm = 2%. In order to study the effect of the interaction between the main flow and the purge flow on the secondary flows, a Rortex method developed by Liu Chaoquan is introduced to identify the vortex in the flow field. In the meantime, a method to calculate the mean entropy production rate based on the particle image velocimetry (PIV) result is adopted to investigate the flow loss. The PIV result indicates that the purge flow has a prominent impact on the flow field of the cascade passage, changing the velocity distribution that induces a local blockage area. The results of vortex identification show that the purge flow promotes the generation of the passage vortex near the suction side. In addition, the purge flow makes the passage vortex migrate to the tip wall direction, enlarging the region affected by the secondary flow. The mean entropy production (MEP) result shows that the flow loss is mainly caused by the passage vortex. The coincidence of the high-MEP region and the location of the passage vortex indicates that the purge flow increases the secondary flow loss by affecting the formation and the migration of the passage vortex.     

基于改进克隆选择算法的统一混沌系统同步控制与参数辨识

提出一种改进的克隆选择算法用于解决混沌系统的参数辨识问题.该算法利用抗体的高频变异和受体编辑两种机制有效平衡算法的全局探索与局部开发，并引入向精英抗体学习策略进一步提高算法的收敛质量.对10个优化问题的实验表明：所提出算法在求解精度、收敛速度以及稳定性方面具有更好的性能.以参数未知统一混沌系统的同步控制为研究对象，合理设计同步控制器，并对同步系统的稳定性进行理论分析.通过对同步比例因子的设置，实现统一混沌系统的完全同步、反同步、投影同步等多种同步方式.仿真实验结果表明该方法能够实现对未知系统参数的精确辨识以及驱动-响应系统的有效同步控制，验证了所提方法的可行性与有效性.     

基于改进云推理算法的塔架结构损伤识别

为了解决塔架结构的损伤识别问题,提出了基于应变能和改进云推理算法的损伤识别方法。首先描述了云模型的基本理论和数字特征,并给出了模态应变能的基本公式;然后分析了X条件云发生器和Y条件云发生器的基本算法和运行步骤,借助灰云模型建立相应的前件云和后件云规则,考虑了测量噪声的影响,利用云发生器生成多组云滴,并利用多模式下云滴的确定度和生成值构建了基本云推理算法及其损伤识别指标。基本云推理算法中常会产生不均匀发散的云滴,从而使计算结果产生一定的偏差,为了降低云滴发散产生的偏差影响,提出了基于损伤模式数量加权的云推理改进策略。计算结果表明:云推理算法可以较好地应用于塔架结构的损伤识别,其识别结果明显优于传统的应变能耗散率指标方法;而改进云推理算法进一步提高了识别的精度,优于基本云推理算法。     

基于L1正则化的随机梁式结构静力损伤识别方法

提出了一种结合摄动法和L1正则化方法的随机梁式结构静力损伤识别方法。考虑初始模型误差和测量误差的影响,建立了关于随机损伤指数的控制方程,并将摄动法和L1正则化方法相结合,对随机损伤指数的控制方程进行求解,进而从概率的角度对结构的损伤进行识别。损伤试验结果表明,和传统的最小二乘求解法相比,本文方法能够更为准确地识别多处局部损伤的位置及大小,对实际结构损伤检测具有较好的参考价值。     

振型归一化对梁结构柔度曲率损伤指标的影响

结构柔度矩阵需由质量矩阵归一化振型获得,而质量矩阵归一化振型难以直接测得,限制了柔度曲率类损伤指标的应用。为分析振型归一化方法对梁结构柔度曲率类损伤指标的影响,根据梁结构的刚度、弯矩和位移曲率的关系,建立了均布荷载作用下结构损伤前后位移曲率与损伤程度的理论表达式,实现定量分析均匀荷载面曲率结构损伤程度。提出P-范数振型归一化方法,通过均匀荷载面曲率指标推导了振型质量矩阵归一化系数差x_α与损伤程度的关系。以三跨连续梁算例对理论进行了验证,结果表明,损伤程度定量指标效果良好,不同P-范数振型归一化方法下,损伤程度的偏差可由2x_α估算;2-范数振型归一化方法的损伤识别结果与质量矩阵振型归一化结果最接近,故当无法获得质量矩阵归一化振型时,可采用2-范数归一化振型代替。     

快凝Pd82Si18合金原子团簇的演化特性及遗传机制

采用分子动力学(MD)模拟计算,对Pd82Si18合金快凝过程中基本原子团簇的遗传特性、演化趋势和结构稳定性进行了研究.团簇类型指数法(CTIM)分析表明:非晶固体中Si原子为中心的(102/14418/1551)双帽阿基米德反棱柱(BSAP)团簇数目占据优势.快凝过程中,BSAP结构团簇具有最大的遗传分数,并且其他以Si原子为中心的Kasper团簇大多都会向BSAP结构团簇转变.通过对Si原子为中心的Kasper基本团簇电子性质第一性原理计算发现,体系中BSAP团簇的结合能最低,结构稳定性较高,与分子动力学计算结果一致.     

Serum pharmacochemistry combined with multiple data processing approach to screen the bioactive components and their metabolites in Mutan Cortex by ultra‐performance liquid chromatography tandem mass spectrometry

Root cortex of Paeonia suffruticosa Andrews (Paeoniaceae), known as Moutan Cortex (MC), is known to have anti‐allergic and anti‐inflammatory properties. However, the constituents absorbed into blood after oral administration of MC remain unknown. A sensitive and rapid method by ultra‐high‐pressure liquid chromatography–electrospray ionization–quadrupole‐time‐of‐flight mass spectrometry (UPLC‐ESI‐Q‐TOF‐MS) technology and the MetaboLynx^TM software combined with multiple data processing approach (Mdpa) was established to investigate the absorbed constituents in rats after oral administration of MC, providing unique high‐throughput capabilities for drug metabolism study. A hyphenated electrospray ionization and quadrupole‐time‐of‐flight analyzer was used for the determination of accurate mass of the fragment ion in negative mode, with excellent MS mass accuracy and enhanced data acquisition. This rapid automated analysis method was successfully applied for screening and identification of the constituents absorbed and metabolized studies of MC after oral administration to rats. A total of 46 peaks were obtained from MC, 41 of which were tentatively characterized. In the VIP‐plot of orthogonal partial least‐squares discriminant analysis, 23 interesting ions in serum samples were extracted, and 16 parent components and seven metabolites were detected in vivo. The integrative serum pharmacochemistry technique, UPLC‐ESI‐Q‐TOF‐MS, and Mdpa method were successfully applied for rapid discovery of multiple components from MC. Copyright © 2013 John Wiley & Sons, Ltd.     

Parameter identification for cracks in elastic plate structures based on remote strain fields

A method for the detection of cracks in plate structures is presented. In contrast to most of the common monitoring concepts taking advantage of the reflection of elastic waves at crack faces, the presented approach is based on the strain measured at different locations on the surface of the structure. This allows both the identification of crack position parameters, such as length, location and angles with respect to a reference coordinate system and the calculation of stress intensity factors (SIF). The solution of the direct problem is performed on the basis of the BFM (body force method). The inverse problem is solved applying the particle swarm optimization (PSO) algorithm. The BFM is based on the principle of linear superposition which allows the calculation of the strain field in a cracked body. The strain at an arbitrary point in the structure is replaced by the strain provided by body force doublets in the uncracked structure. The doublets as well as external loads are parameters which have to be determined solving the inverse problem by minimizing a fitness function, which is defined by a square sum of residuals between measured strain distributions and computed ones for an assumed crack. The PSO algorithm applied to the fitness function operates on the basis of a swarm of candidate solutions. Once knowing loading and crack parameters, the SIF can be determined.     

Metabolite identification of tanshinol borneol ester in rats by high‐performance liquid chromatography combined with electrospray ionization quadrupole time‐of‐flight mass spectrometry

Tanshinol borneol ester (DBZ) is a potential drug candidate composed of danshensu and borneol. It shows anti‐ischemic and anti‐atherosclerosis activity. However, little is known about its metabolism in vivo. This research aimed to elucidate the metabolic profile of DBZ through analyzing its metabolites using high‐performance liquid chromatography combined with electrospray ionization quadrupole time‐of‐flight mass spectrometry. Chromatographic separation was performed on an Agilent TC‐C₁₈ column (150 × 4.6 mm, 5.0 μm) with gradient elution using methanol and water containing 0.2% (v/v) formic acid as the mobile phase. Metabolite identification involved analyzing the retention behaviors, changes in molecular weights and MS/MS fragment patterns of DBZ and its metabolites. As a result, 20 potential metabolites were detected and tentatively identified in rat plasma, urine and feces after administration of DBZ. DBZ could be metabolized to O‐methylated DBZ, DBZ‐O‐glucuronide, O‐methylated DBZ‐O‐glucuronide, hydroxylated DBZ and danshensu. Danshensu, a hydrolysis product of DBZ, could further be transformed into 12 metabolites. The proposed method was confirmed to be a reliable and sensitive alternative for characterizing metabolic pathways of DBZ and providing valuable information on its druggability.